The menus appearing on the Control window vary depending on whether the data is being captured live or whether you are looking at a .cfa file. The following tables describe each menu.
| Mode | Selection | Hot Key | Description |
|---|---|---|---|
| Live | |||
| Close | Closes Live mode. | ||
| Capture File | Go Live | Returns to Live mode | |
| Reframe | If you need to change the protocol stack used to interpret a capture file and the framing is different in the new stack, you need to reframe in order for the protocol decode to be correct. See Reframing | ||
| Unframe | Removes start-of-frame and end-of-frame markers from your data. See Unframing | ||
| Recreate Companion File | This option is available when you are working with decoders. If you change a decoder while working with data, you can recreate the ".frm file", the companion file to the ".cfa file". Recreating the ".frm file" helps ensure that the decoders will work properly. | ||
| Reload Decoders | The plug-ins are reset and received frames are decoded again. | ||
| Live & Capture File | Open Capture File | Ctrl--O | Opens a Windows Open file dialog. at the default location "...\Public Documents\Frontline Test Equipment\My Capture Files\". Capture files have a .cfa extension. |
| Save | Ctrl-S | Saves the current capture or capture file. Opens a Windows Save As dialog at the default location "...\Public Documents\Frontline Test Equipment\My Capture Files\". | |
| Exit ComProbe Protocol Analysis System | Shuts down the ComProbe Protocol Analysis System and all open system windows. | ||
| Recent capture files | A list of recently opened capture files will appear. |
The View menu selections will vary depending on the Frontline analyzer in use.
| Mode | Selection | Hot key | Description |
|---|---|---|---|
| Live & Capture File | Event Display | Ctrl-Shift-E | Opens the Event Display window for analyzing byte level data. |
| Frame Display | Ctrl-Shift-M | Opens the Frame Display window for analyzing protocol level data | |
| Statistics | Ctrl-Shift-S | Opens the Statistics Window that shows information about packet throughput. | |
| Coexistence View | Opens the Coexistence View window that can simultaneously display Classic Bluetooth, Bluetooth low energy, and 802.11 packets and thourghput. | ||
| Wi-Fi Error Statistics | Opens the Wi-Fi Error Statistics window that displays the number of packet errors. |
| Mode | Selection | Hot-key | Description |
|---|---|---|---|
| Capture File | Notes | Ctrl-Shift-O | Opens the Notes window that allows the user to add comments to a capture file. |
The Live menu selections will vary depending on the Frontline analyzer in use.
| Mode | Selection | Hot-Key | Description |
|---|---|---|---|
| The following two rows apply to all Frontline products except Set in Target. | |||
| Live | Start Capture | Shift-F5 | Begins data capture from the configured wireless devices. |
| Stop Capture | F10 | Stops data capture from the configured wireless devices. | |
| The following rows apply to all Frontline products | |||
| Live | Clear | Shift-F10 | Clears or saves the capture file. |
| Live & Capture File | Hardware Settings |
0 - Classic 1 - Bluetooth low energy |
|
| I/O Settings |
0 - Classic 1 - Bluetooth low energy |
||
| System Settings | Alt-Enter | Opens the System Settings dialog for configuring capture files. | |
| Directories... | Opens the File Locations dialog where the user can change the default file locations. | ||
| Check for New Releases at Startup | When this selection is enabled, the program automatically checks for the latest Frontline protocol analyzer software releases. | ||
| Side Names... | Opens the Side Names dialog used to customize the names of the slave and master wireless devices. | ||
| Protocol Stack... | Opens the Select a Stack dialog where the user defines the protocol stack they want the analyzer to use when decoding frames. | ||
| Set Initial Decoder Parameters... | Opens the Set Initial Decoder Parameters window. There may be times when the context for decoding a frame is missing. For example, if the analyzer captured a response frame, but did not capture the command frame, then the decode for the response may be incomplete. The Set Initial Decoder Parameters dialog provides a means to supply the context for any frame. The system allows the user to define any number of parameters and save them in templates for later use.Each entry in the window takes effect from the beginning of the capture onward or until redefined in the Set Subsequent Decoder Parameters dialog. This selection is not present if no decoder is loaded that supports this feature. | ||
| Set Subsequent Decoder Parameters... | Opens the Set Subsequent Decoder Parameters dialog where the user can override an existing parameter at any frame in the capture. Each entry takes effect from the specified frame onward or until redefined in this dialog on a later frame. This selection is not present if no decoder is loaded that supports this feature. | ||
| Automatically Request Missing Decoder Information |
When checked, this selection opens a dialog that asking for missing frame information. When unchecked, the analyzer decodes each frame until it cannot go further and it stops decoding. This selection is not present if no decoder is loaded that supports this feature. |
||
| Enable/Disable Audio Expert System | When enabled, the Audio Expert System is active, other wise it is not available. Only available when an Audio Expert System licensed device is connected. | ||
The Windows menu selection applies only to the Control window and open analysis windows: Frame Display, Event Display, Message Sequence Chart, Bluetooth Timeline, Bluetooth low energy Timeline, and Coexistence View. All other windows, such as the datasource, are not affected by these selections.
| Mode | Selection | Hot-Key | Description |
|---|---|---|---|
| Live & Capture File | Cascade | Ctrl-W | Arranges open analysis windows in a cascaded view with window captions visible. |
| Close All Views | Closes Open analysis windows. | ||
| Minimize Control Minimizes All | When checked, minimizing the Control window also minimizes all open analysis windows. | ||
| Frame Display and Event Display | When these windows are open the menu will display these selections. Clicking on the selection will bring that window to the front. |
| Mode | Selection | Hot-Key | Description |
|---|---|---|---|
| Live & Capture File | Help Topics | Opens the Frontline Help window. | |
| About Frontline Protocol Analysis System | Provides a pop-up showing the version and release information, Frontline contact information, and copyright information. | ||
| Support on the Web | Opens a browser to |